0
Call Toll Free :

1 (888) 897-4263

We Accept :

Shane Coatings -
ELASTO-RESTORATION 140

ELASTO-RESTORATION 140 Superior Elastomeric Restoration Compound
Restores Wood & Stucco to Like New Conditions!

$71.94 (1 Gallon) & $260 Shipping
Minimum Order 25 Gallons (Any Product)

Product Description :

ELASTO-RESTORATION-140™ – Elastomeric Restoration Compound is an innovative product for restoring substrates with amazing restoration capabilities to like new conditions! Fills holes, cracks, and voids with ease.

Additional Product Information

Specifically designed for wood and stucco restoration problems but can be used on concrete and brick as well.

This advanced surface restoring compound provides increased protection by sealing out moisture and other weathering elements (a leading causes of deterioration).

Stays flexible and helps to retard cracking from freeze and thaw movements.

Fills voids and bridges cracks up to ¼ inch wide. Mildew resistant, rust inhibiting and paint-able. Dead flat acrylic finish will not flash.

Performance Properties:
  • Permanently Flexible Material – Won’t Crack
  • Restores to Like New Conditions
  • Fills Cracks, Holes, and Voids
  • Stops Recurring Cracking
  • Inhibits Rust
  • Resists Mildew
  • Waterproof- Seals out Water & Moisture
  • Smooth Finish
  • Easy-to-use
Surfaces to Use On:
  • Masonry / Brick
  • Concrete/Cement
  • Stucco
  • Wood
  • Wood products
Areas to Use:
  • Interior & Exterior
  • Previously Painted Surfaces
  • Exterior & Interior Ceilings
  • Interior & Exterior Walls
  • Great for Both Commercial & Residential Applications
  • Fascia Boards
  • Doors
  • Window Trim
  • And More
Packaging:

1 Gallon Container

Surface Preparation:

ELASTO-SEAL/BOND-KOTE 260™ should be used only on a firm, dry, clean and fully cured surfaces. Surfaces need to be free from loose, peeling, dusty, chalky, grease, oil, lime, salts, efflorescence and dirt. Before application remove all loose, flaking, or chipping paint by washing, sanding, wire brushing, and/or high-pressure washing.

Thinning Recommendation:

This coating is intended to be applied without thinning or diluting.

Health & Safety:

Use in a well-ventilated area.

In Case of Eye Contact:

Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged contact with skin. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION! Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 110 °F. Close container tightly when not in use.

Keep out of reach of children

LIMITED LIFETIME WARRANTY:

SCMFG CORPORATION warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SCMFG CORPORATION, a subsidiary of The Shane Coatings Company.

Additional Product Information Downloads:
Download SDS – Safety Data Sheet
Download PDS – Product Data Sheet
Download PSS – Product Sales Sheet

$71.94 (1 Gallons)
& $260 Shipping

Minimum Order 25 Gallons

Add to Wishlist
Add to Wishlist
Additional Product Information

Specifically designed for wood and stucco restoration problems but can be used on concrete and brick as well.

This advanced surface restoring compound provides increased protection by sealing out moisture and other weathering elements (a leading causes of deterioration).

Stays flexible and helps to retard cracking from freeze and thaw movements.

Fills voids and bridges cracks up to ¼ inch wide. Mildew resistant, rust inhibiting and paint-able. Dead flat acrylic finish will not flash.

Performance Properties:
  • Permanently Flexible Material – Won’t Crack
  • Restores to Like New Conditions
  • Fills Cracks, Holes, and Voids
  • Stops Recurring Cracking
  • Inhibits Rust
  • Resists Mildew
  • Waterproof- Seals out Water & Moisture
  • Smooth Finish
  • Easy-to-use
Surfaces to Use On:
  • Masonry / Brick
  • Concrete/Cement
  • Stucco
  • Wood
  • Wood products
Areas to Use:
  • Interior & Exterior
  • Previously Painted Surfaces
  • Exterior & Interior Ceilings
  • Interior & Exterior Walls
  • Great for Both Commercial & Residential Applications
  • Fascia Boards
  • Doors
  • Window Trim
  • And More
Packaging:

1 Gallon Container

Surface Preparation:

ELASTO-SEAL/BOND-KOTE 260™ should be used only on a firm, dry, clean and fully cured surfaces. Surfaces need to be free from loose, peeling, dusty, chalky, grease, oil, lime, salts, efflorescence and dirt. Before application remove all loose, flaking, or chipping paint by washing, sanding, wire brushing, and/or high-pressure washing.

Thinning Recommendation:

This coating is intended to be applied without thinning or diluting.

Health & Safety:

Use in a well-ventilated area.

In Case of Eye Contact:

Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged contact with skin. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION! Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 110 °F. Close container tightly when not in use.

Keep out of reach of children

LIMITED LIFETIME WARRANTY:

SCMFG CORPORATION warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SCMFG CORPORATION, a subsidiary of The Shane Coatings Company.

Additional Product Information Downloads:
Download SDS – Safety Data Sheet
Download PDS – Product Data Sheet
Download PSS – Product Sales Sheet

Customer Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Our Sustainable Development

Our Sustainable Development Campaign is bringing to light, our business of doing good.
With an ongoing commitment to Innovation serving as its cornerstone.