0
Call Toll Free :

1 (888) 897-4263

We Accept :

Shane Coatings -
TONE-LOCK 110

TONE-LOCK 110 Transparent Toning Lacquer
Bringing Out the Natural Beauty Of Fine Finished Wood

$369.75 (5 Gallons) & $260 Shipping
Minimum Order 25 Gallons (Any Product)

Product Description :

TONE-LOCK 110™ is a premium transparent toning lacquer which is designed to easily bring out the natural beauty of your wood grains but without the need to strip existing lacquer finishes.

As a solvent lacquer, this product is formulated to dry fast, spray easily, and provide a durable long-lasting hard finish on properly sealed surfaces.

Has been formulated exclusively for refinishing fine wood such as interior wood cabinets, trim, doors, paneling, banisters, furniture, and other similar fine wood surfaces.

Additional Product Information

A hybrid product that’s applied right over the original color and top coat. Changes your existing stain color from one to another.

Leaves the beauty of your wood to shine through without affecting the adhesion or durability of the Lacquer Finish!

Compatible with Most Previous Lacquer Finishing Systems

TONE-LOCK 110™ is completely compatible with most previous lacquer finishing systems. This lead-free, non-photo-chemical reactive tone lacquer is formulated to enhance the natural beauty of both hard and soft kinds of wood, without obscuring the grain patterns.

  • Intended for use on previously Lacquer finished wooden surfaces.
  • Also works great on new interior wood trim, cabinets, paneling, doors and furniture.

The Lacquer Coating Preferred by Many Professionals

Shane Coatings™ TONE-LOCK 110™ is the original formula Lacquer favored by many professional painting contractors and manufacturers of mill-work, cabinetry, furniture, and more.

TONE-LOCK 110™ is specifically formulated for re-wetting or re-dissolving previously Lacquer finished surfaces. May also be used to a achieve deep penetration on new unfinished wooden surfaces for enhancing the beauty of your wood.

This Lacquer provides an exceptionally clean appearance with an increased depth of color and vibrancy. Provides interior wood with a distinctively warm and rich appearance.

Available Colors

Shane Coatings Tone Lacquer is available in a clear base. Also available in a wide selection of our signature colors.

Custom Colors and matches can also be achieved. Tint-able with 844 Industrial Colorants.

Not compliant for architectural use in containers larger than quarts

This lacquer (as with all nitrocellulose lacquers) has a tendency to amber with exposure to UV light and so is not intended for exterior surfaces.

Performance Properties:
  • Re-Wets and Dissolves Existing Lacquer Finishes
  • Penetrates Deep into Wood Grain
  • Long-Lasting Hard Lacquer Finish
  • Brings out the Natural Beauty of Wood Grain
  • Can Change Existing Stain Color Without Stripping
Surfaces to Use On:

FOR WOOD SUBSTRATES ONLY

Areas to Use:
  • Interior Wood
  • Wood cabinets
  • Wood Trim
  • Wood Doors
  • Wood Paneling
  • Wood Banisters
  • Wood Furniture
  • Other Similar Interior Wood Surfaces
Packaging:

5 Gallon Container

Surface Preparation:

All surfaces must be cured, clean, dry, and free from dirt, dust, stains, grease, oil, mildew, wax, sawdust, glue, and other contaminants.

New wood should be sanded smooth following the direction of the wood grain.

All cracks, nail holes, and other surface imperfections should be filled with a suitable patching material or wood putty.

Repaired surfaces should then be sanded smooth and wiped clean. Use a rag to remove all remaining dust, lint, and other foreign matter before proceeding.

Do not apply over previously painted, varnished, or other non-lacquer finishes because lifting or softening of the finish may result.

If applied over old finish make test application in a small area to determine if lifting will occur before applying to an entire job.

Thinning Recommendation:

TONE-LOCK 110™ may be thinned with up to 20% Acetone.

Coverage

200-250 sq. ft. per gallon depending on surface conditions.

Cleanup

Use acetone to clean all equipment. Dispose of dirty solvent and cleaning rags in a safe and appropriate manner.

Solvent or lacquer soaked rags should be stored in a water-filled container prior to appropriate disposal.

Health & Safety:

Use in a well-ventilated area. Do not breathe vapors. Use only with adequate ventilation.

Always wear appropriate respirator equipment when spraying or applying this material. If you experience difficulty breathing, leave the area immediately to obtain fresh air. If persists seek immediate medical attention.

Flammable. Keep away from heat, sparks, and flames.

In Case of Eye Contact:

Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged contact with skin. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION: EXTREMELY FLAMMABLE! Extinguish all flame sources before use.

Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 80 °F. Close container tightly when not in use.

Extreme temperatures may cause the product to become unusable. For example, Freezing and thawing may cause the product to gel. And high heat may cause a solid skin to form.

Keep out of reach of children

LIMITED LIFETIME WARRANTY:

SC Manufacturing LLC warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SC Manufacturing LLC, a subsidiary of The Shane Coatings Company.

$369.75 (5 Gallons)
& $260 Shipping

Minimum Order 25 Gallons

$
Add to Wishlist
Add to Wishlist
Additional Product Information

A hybrid product that’s applied right over the original color and top coat. Changes your existing stain color from one to another.

Leaves the beauty of your wood to shine through without affecting the adhesion or durability of the Lacquer Finish!

Compatible with Most Previous Lacquer Finishing Systems

TONE-LOCK 110™ is completely compatible with most previous lacquer finishing systems. This lead-free, non-photo-chemical reactive tone lacquer is formulated to enhance the natural beauty of both hard and soft kinds of wood, without obscuring the grain patterns.

  • Intended for use on previously Lacquer finished wooden surfaces.
  • Also works great on new interior wood trim, cabinets, paneling, doors and furniture.

The Lacquer Coating Preferred by Many Professionals

Shane Coatings™ TONE-LOCK 110™ is the original formula Lacquer favored by many professional painting contractors and manufacturers of mill-work, cabinetry, furniture, and more.

TONE-LOCK 110™ is specifically formulated for re-wetting or re-dissolving previously Lacquer finished surfaces. May also be used to a achieve deep penetration on new unfinished wooden surfaces for enhancing the beauty of your wood.

This Lacquer provides an exceptionally clean appearance with an increased depth of color and vibrancy. Provides interior wood with a distinctively warm and rich appearance.

Available Colors

Shane Coatings Tone Lacquer is available in a clear base. Also available in a wide selection of our signature colors.

Custom Colors and matches can also be achieved. Tint-able with 844 Industrial Colorants.

Not compliant for architectural use in containers larger than quarts

This lacquer (as with all nitrocellulose lacquers) has a tendency to amber with exposure to UV light and so is not intended for exterior surfaces.

Performance Properties:
  • Re-Wets and Dissolves Existing Lacquer Finishes
  • Penetrates Deep into Wood Grain
  • Long-Lasting Hard Lacquer Finish
  • Brings out the Natural Beauty of Wood Grain
  • Can Change Existing Stain Color Without Stripping
Surfaces to Use On:

FOR WOOD SUBSTRATES ONLY

Areas to Use:
  • Interior Wood
  • Wood cabinets
  • Wood Trim
  • Wood Doors
  • Wood Paneling
  • Wood Banisters
  • Wood Furniture
  • Other Similar Interior Wood Surfaces
Packaging:

5 Gallon Container

Surface Preparation:

All surfaces must be cured, clean, dry, and free from dirt, dust, stains, grease, oil, mildew, wax, sawdust, glue, and other contaminants.

New wood should be sanded smooth following the direction of the wood grain.

All cracks, nail holes, and other surface imperfections should be filled with a suitable patching material or wood putty.

Repaired surfaces should then be sanded smooth and wiped clean. Use a rag to remove all remaining dust, lint, and other foreign matter before proceeding.

Do not apply over previously painted, varnished, or other non-lacquer finishes because lifting or softening of the finish may result.

If applied over old finish make test application in a small area to determine if lifting will occur before applying to an entire job.

Thinning Recommendation:

TONE-LOCK 110™ may be thinned with up to 20% Acetone.

Coverage

200-250 sq. ft. per gallon depending on surface conditions.

Cleanup

Use acetone to clean all equipment. Dispose of dirty solvent and cleaning rags in a safe and appropriate manner.

Solvent or lacquer soaked rags should be stored in a water-filled container prior to appropriate disposal.

Health & Safety:

Use in a well-ventilated area. Do not breathe vapors. Use only with adequate ventilation.

Always wear appropriate respirator equipment when spraying or applying this material. If you experience difficulty breathing, leave the area immediately to obtain fresh air. If persists seek immediate medical attention.

Flammable. Keep away from heat, sparks, and flames.

In Case of Eye Contact:

Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged contact with skin. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION: EXTREMELY FLAMMABLE! Extinguish all flame sources before use.

Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 80 °F. Close container tightly when not in use.

Extreme temperatures may cause the product to become unusable. For example, Freezing and thawing may cause the product to gel. And high heat may cause a solid skin to form.

Keep out of reach of children

LIMITED LIFETIME WARRANTY:

SC Manufacturing LLC warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SC Manufacturing LLC, a subsidiary of The Shane Coatings Company.

Customer Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Our Sustainable Development

Our Sustainable Development Campaign is bringing to light, our business of doing good.
With an ongoing commitment to Innovation serving as its cornerstone.