0
Call Toll Free :

1 (888) 897-4263

We Accept :

Shane Coatings -
WEATHERPRO 8720

WEATHERPRO 8720 Ultra-Low VOC Interior & Exterior Paint Coating
Eco-Friendly - Better for Your Health & Environment

$225.95 (5 Gallons) & $260 Shipping
Minimum Order 25 Gallons (Any Product)

Product Description :

WEATHERPRO 8720 is a professionally superior interior & exterior ultra-low VOC, latex “high build” coating.

This low sheen eco-friendly paint is better for your health and better for the world. With its low VOC emissions, it is ideal for use on new or existing residential, commercial, and multi-tenant housing projects.

WEATHERPRO 8720™ provides exceptional hide, block resistance, and touch-up. Can be used on properly prepared and primed masonry, wood, and metal. WEATHERPRO is self-priming on new drywall. Can be used down to surface and air temperatures 35°F.

Additional Product Information

With its superior “high build” formulation WEATHERPRO 8720™ produces a much thicker coating film for more advanced protection and a longer lasting finish. Compare our high build 15 mils thickness vs. a typical 3-5 mils thickness for most regular paint.

WEATHERPRO 8720™ Performance Properties:
  • Provides Exceptional Hiding & Covering
  • Excellent Block Resistance (Paint Won’t Stick to Itself)
  • Self-Priming on New Drywall
  • Easy to Touch-up
  • Low-Temperature Application (Down to 35°F)
  • “High Build” Thickness for Better Coating Protection
Surfaces to Use On:
  • Masonry / Brick
  • Stucco
  • Concrete
  • Wood
  • Wood products
  • Metal
  • Drywall
  • Seals to Most Other Hard Porous Surfaces if Properly Primed
Areas to Use:
  • Interior & Exterior Porous Surfaces
  • Previously Painted Surfaces
  • Exterior & Interior Ceilings
  • Exterior & Interior Walls
  • Residential & Commercial
Application Coverage:

Approximately 95-110 Square Feet per Gallon depending on surface conditions and application methods.

VOC Specifications:

Maximum VOC Content = 50 g/L (as applied)

Maximum RAVOC (Reactivity-Adjusted VOC) = 20 g/L

Application Instructions:

Apply with an airless spray, or brush & roller. On new surfaces, 2 coats are recommended. On old surfaces, 1 or 2 coats is recommended. Clean-up with warm soapy water. Only use in favorably dry weather condition above 35 degrees Fahrenheit. Apply correct type of primer depending on the type of surface.

Average Dry Time:

To Touch: 1-2 Hours

Recoat: 4-6 Hours

Dry times and recoat times are temperature, humidity and film thickness dependent. The above dry times are based on 77 °F or 25 °C (ASTM D 1640).

Packaging:

5 Gallon Container

Surface Preparation:

WEATHERPRO 8720™ should be used only on firm, dry, clean and fully cured surfaces. Surfaces need to be free from loose, peeling, dusty, chalky, grease, oil, lime, salts, efflorescence and dirt. Before application remove all loose, flaking, or chipping paint by washing, sanding, wire brushing, and/or high-pressure washing.

Repair all larger abrasions, cracks, holes and other imperfections with appropriate patching compounds. Will fill smaller cracks and holes with no need to fill before application. Dull all glossy surfaces for proper adhesion through sanding or other appropriate means.

Thinning Recommendation:

This coating is intended to be applied without thinning or diluting under normal environmental and application conditions. If necessary to maintain good workability add up to ¼ pint (4 fl. oz.) of clean water per gallon of paint.

Health & Safety:

Although this is a low VOC paint product we still recommend that you always wear an appropriate respirator equipment when spraying and material. If you experience difficulty breathing, leave the area immediately to obtain fresh air. If persists seek immediate medical attention.

In Case of Eye Contact:

If you have eye contact – Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged skin contact. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION! Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 110 °F.  Close container tightly when not in use.

 

Keep out of reach of children: Avoid prolonged contact with skin.

LIMITED LIFETIME WARRANTY:

SC Manufacturing LLC warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SC Manufacturing LLC, a subsidiary of The Shane Coatings Company.

$225.95 (5 Gallons)
& $260 Shipping

Minimum Order 25 Gallons

$
Add to Wishlist
Add to Wishlist
Additional Product Information

With its superior “high build” formulation WEATHERPRO 8720™ produces a much thicker coating film for more advanced protection and a longer lasting finish. Compare our high build 15 mils thickness vs. a typical 3-5 mils thickness for most regular paint.

WEATHERPRO 8720™ Performance Properties:
  • Provides Exceptional Hiding & Covering
  • Excellent Block Resistance (Paint Won’t Stick to Itself)
  • Self-Priming on New Drywall
  • Easy to Touch-up
  • Low-Temperature Application (Down to 35°F)
  • “High Build” Thickness for Better Coating Protection
Surfaces to Use On:
  • Masonry / Brick
  • Stucco
  • Concrete
  • Wood
  • Wood products
  • Metal
  • Drywall
  • Seals to Most Other Hard Porous Surfaces if Properly Primed
Areas to Use:
  • Interior & Exterior Porous Surfaces
  • Previously Painted Surfaces
  • Exterior & Interior Ceilings
  • Exterior & Interior Walls
  • Residential & Commercial
Application Coverage:

Approximately 95-110 Square Feet per Gallon depending on surface conditions and application methods.

VOC Specifications:

Maximum VOC Content = 50 g/L (as applied)

Maximum RAVOC (Reactivity-Adjusted VOC) = 20 g/L

Application Instructions:

Apply with an airless spray, or brush & roller. On new surfaces, 2 coats are recommended. On old surfaces, 1 or 2 coats is recommended. Clean-up with warm soapy water. Only use in favorably dry weather condition above 35 degrees Fahrenheit. Apply correct type of primer depending on the type of surface.

Average Dry Time:

To Touch: 1-2 Hours

Recoat: 4-6 Hours

Dry times and recoat times are temperature, humidity and film thickness dependent. The above dry times are based on 77 °F or 25 °C (ASTM D 1640).

Packaging:

5 Gallon Container

Surface Preparation:

WEATHERPRO 8720™ should be used only on firm, dry, clean and fully cured surfaces. Surfaces need to be free from loose, peeling, dusty, chalky, grease, oil, lime, salts, efflorescence and dirt. Before application remove all loose, flaking, or chipping paint by washing, sanding, wire brushing, and/or high-pressure washing.

Repair all larger abrasions, cracks, holes and other imperfections with appropriate patching compounds. Will fill smaller cracks and holes with no need to fill before application. Dull all glossy surfaces for proper adhesion through sanding or other appropriate means.

Thinning Recommendation:

This coating is intended to be applied without thinning or diluting under normal environmental and application conditions. If necessary to maintain good workability add up to ¼ pint (4 fl. oz.) of clean water per gallon of paint.

Health & Safety:

Although this is a low VOC paint product we still recommend that you always wear an appropriate respirator equipment when spraying and material. If you experience difficulty breathing, leave the area immediately to obtain fresh air. If persists seek immediate medical attention.

In Case of Eye Contact:

If you have eye contact – Flush immediately with plenty of water for at least 15 minutes and get medical attention.

Avoid prolonged skin contact. Wash paint from your skin with soap and water. Replace lid on container tightly after each use.

Storage:

CAUTION! Do not freeze. Store in a cool, dry area out of direct sunlight. Protect from elements and from temperatures above 110 °F.  Close container tightly when not in use.

 

Keep out of reach of children: Avoid prolonged contact with skin.

LIMITED LIFETIME WARRANTY:

SC Manufacturing LLC warrants your complete satisfaction with this product from defect as long as you own or reside in your residence when our product has been applied and maintained according to exact label directions.

We do not warrant problems with the product which are caused by factors beyond our control, such as structural defects, damage to the paint film by others, poor condition of the substrate, improper application, etc.

If not satisfied as warranted, return the unused portion, as well as a sales receipt to the place of purchase. You will receive as your exclusive remedy either from a refund of the price paid for the product, or replacement with a product of equal value.

This product warranty specifically excludes labor or cost of labor for the application of any paint and consequential, incidental damages. However, the warranty is only valid if applied by a Shane Coatings™ certified technician.

Some states do not allow the exclusion of consequential or incidental damages, so the limitation or exclusion contained in the above warranty may not apply to you.

This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

Warranty is backed by SC Manufacturing LLC, a subsidiary of The Shane Coatings Company.

Customer Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

Our Sustainable Development

Our Sustainable Development Campaign is bringing to light, our business of doing good.
With an ongoing commitment to Innovation serving as its cornerstone.